Get ready for a spout full of fun by easily attaching the battery-operated Flow ‘N’ Fill Spout to the side of the tub with the blue pump suspended in the bath water.
Designed especially for budding gross motor skills, press on the large, silly-eyed diver button to start the flow of water and hours of fun in the tub.
Place each of the three bath tumblers under the stream to experience their different straining and spraying effects.
Stack the tumblers and watch with delight as the water runs through them all.
Watch the water spin the propeller and try to stop it with your finger.
Place the float friend in the tumbler and fill it with water for a silly game of peek-a- boo.
Block the water stream with your finger and prepare to get wet as the crazy sprinkler begins squirting water instead.
Let your child fill and spill water into the bath and on their body, moving the swivel arm from side to side and trying to activate the tumblers.
Store the tumblers on the swivel arm to dry up and get ready for another exciting bath tomorrow…
Award
Winning
What's Inside
1 x battery-operated spout
1 x propeller tumbler
1 x shower tumbler
1 x peek-a-boo tumbler and float
Play & Develop
Cognitive Development
Physical Development
Social & Emotional Development
Good to Know
Safety first
The spout caters to kids’ love of running water by recirculating bath water, keeping water level and temperature safe and steady.
Eco-friendly
No more running water! The spout’s unique circulating water pump (CWP) runs an endless stream of water without wasting water from the tap.
Certified
The spout upholds the most stringent safety standards (ASTM, IN 71, ECT’) and is IPX7 waterproof certified, ensuring utmost safety in using battery operated products when immersed in water.
...Between two kids and 6 years of bath toys.. this is by far the best bath toy we have ever had. My kids have been playing with this every few days for the last month...I love that the spout can turn left/right/straight and also if you cover the stream it turns out of the top sort of like a sprinkler!..." | mWit
FAQ
-
Is it safe to use this battery-operated product under water?
Yes. The spout upholds the most stringent safety standards (ASTM, EN71, ect’) and is IPX7 waterproof certified, ensuring the utmost safety in using battery-operated products when immersed in water. Still, please follow these guidelines to ensure optimal safe use of the product:
1. Use 3 X AA batteries only.
2. WARNNING: don’t use rechargeable batteries.
3. Use quality batteries of a known brand.
4. Make sure the battery compartment is tightly sealed after every time you change the batteries.
-
Is this product BPA free?
Yes, this product is BPA free.
-
What age is this product for?
This product is recommended for children ages 9-36 months. No matter what their age, you should never leave a child unattended in the bathroom or bathtub.
-
How do I operate the spout for the first time?
Before you can start enjoying your new Flow ‘N’ Fill Spout, batteries must be inserted. We strongly recommend using new, good quality batteries to ensure optimal operation over time.
-
What types of batteries are needed to operate the product?
3 X AA batteries (not included) of good quality and a known brand are needed. WARNNING: don’t use rechargeable batteries.
-
Where is the battery compartment located on the spout?
The battery compartment is located on the back of the spout unit.
-
How do I insert batteries?
Attention! Before inserting batteries, ensure the product is dried thoroughly! To insert batteries, unscrew the battery compartment cover (located on the back of the spout unit) with a Phillips Head screwdriver. Insert 3 X 1.5V AA (LR6) batteries, ensuring correct polarity. Close the compartment cover and screw firmly into position. Attention! Before putting the spout in the water, make sure the battery compartment is tightly sealed.
-
How do I fix the spout to the bathtub?
Use the suction cups located on the back of the spout to fix it into place. Simply wet the suction cups and attach them to the side of the bathtub, keeping the lower suction cup as close to the bottom of the tub as possible.
-
What is the required water level to operate the spout?
In order to operate the spout, make sure the water level is such that the pump unit is submerged in the water.
-
What effects do the tumblers create in the water?
1. Create a shower.
2. Spin the propeller.
3. Watch the peek-a-boo friend float to the top. -
How do I clean the filter?
Unscrew the filter (located on the side of the blue pump unit) and pull it out. Wash with soap and water until the filter mesh is clean. Make sure the inner propeller is also clean and spins freely. Reposition the filter and screw firmly into place.
-
The Flow 'N' Fill Spout stopped working. What do I do?
The product may stop working when the propeller or filter are blocked by dirt, hair, or soap. In order to fix this, unscrew the filter and pull it out. Wash with soap and water, ensuring that the filter mesh is completely clean. Make sure the propeller rotates freely. If it does not, try to release the clog with a screwdriver, until it rotates freely again. Reinsert filter and screw into place.
If you want to watch a tutorial: click here.
If the water is still not running, change the batteries and make sure to tightly close the battery compartment lid (see instructions above). -
The spout doesn’t work. What do I do?
1. Verify correct polarity of batteries.
2. Change batteries.
3. Still doesn’t work? Contact us. -
How do I start the water flow?
To start the flow of water, press on the orange diver’s mask located on the red part of the spout unit and wait for a couple of seconds.
-
What should I do if I notice mold developing from the spout head?
It is recommended to properly rinse, drain, and dry out the product after every use. Use the cup dispenser to ensure dry and mold-free storage of the tumblers. Unless you do that, Yookidoo® bath toys will need a good cleaning every two weeks or so in order to remain mold-free. When a thorough cleaning is required, fill up a bucket with water and add in some vinegar. Let the spout soak in the vinegar water for around 20 minutes, then activate it a few times to circulate the water through it. Repeat this step with clean water to wash out the vinegar. Rinse the spout off and dry using a paper or cloth towel.
-
How often should I clean the filter?
The filter should be cleaned every time the batteries are replaced or if the stream of water is too slow.
-
The water flow from the spout is too slow. What do I do?
1. Allow the pump to fill up with water – plug the water output hole at the end of the spout with one finger for a minute.
2. Clean filter – clean mesh and make sure that the filter propeller spins freely.
3. Change batteries. -
What is the date code and where can I find it on the product?
The Yookidoo date code helps us track the production date of the product. The date code of the Yookidoo Flow ‘N’ Fill Spout is under the battery lid. It is a 5-digit number that ends with letters.
